Woodpecker holes stucco

Home / Woodpecker holes stucco

Woodpecker holes stucco Services in Toronto

Did you know that woodpecker holes in stucco are the perfect place to hang your birdhouse? The walls are smooth and flat, so they’re easier to hang from. Even though woodpeckers often target houses that have bricks for their nesting sites, this design works out perfectly well for them because it has no issues with stability!

How To Fix Woodpecker Holes In Stucco

Woodpecker holes are small holes in a stucco surface that look like they were made by woodpeckers. These holes can be easily repaired with a few simple steps.

Step 1 – Clean the Holes

Before you do anything else, clean out any debris from the hole using a damp cloth. This will make it easier for you to repair the hole and avoid damaging your stucco surface.

Step 2 – Mixing Sand & Binder

Mix sand and binder together until they are the same color. In this case, we used Bond Block because it was available at our local hardware store. However, other types of sand and binder may also work well for this step.

Step 3 – Pouring into the Holes

Once you’ve mixed your sand and binder together, pour some into each of your woodpecker holes until they are full enough so that they form little balls at the bottom of the hole (just below where they meet up with another hole). You’ll want to make sure that you don’t overfill any holes as this could lead to problems later on down the road if bits of loose dirt or debris get caught between those little balls at the bottom of your repair job

How To Fix Woodpecker Holes In Stucco

Woodpecker holes are small holes in a stucco surface that look like they were made by woodpeckers. These holes can be easily repaired with a few simple steps.

Step 1 – Clean the Holes

Before you do anything else, clean out any debris from the hole using a damp cloth. This will make it easier for you to repair the hole and avoid damaging your stucco surface.

Step 2 – Mixing Sand & Binder

Mix sand and binder together until they are the same color. In this case, we used Bond Block because it was available at our local hardware store. However, other types of sand and binder may also work well for this step.

Step 3 – Pouring into the Holes

Once you’ve mixed your sand and binder together, pour some into each of your woodpecker holes until they are full enough so that they form little balls at the bottom of the hole (just below where they meet up with another hole). You’ll want to make sure that you don’t overfill any holes as this could lead to problems later on down the road if bits of loose dirt or debris get caught between those little balls at the bottom of your repair job

How To Remove Woodpecker Holes From Your Stucco Wall

Woodpeckers are one of the most common birds that cause problems for homeowners. They can cause serious damage to stucco walls, causing them to look like they have been damaged by a woodpecker.

This can cause problems with your home insurance, as well as with your neighbors who may claim they did not know about the damage until after the repairs were made.

If you find that you have woodpecker holes in your stucco walls, there is a simple way to repair them without having to spend money on new stucco or paint.

Step 1 – Find The Holes

The first thing you will need to do is find out where all of the holes are in your wall. This can be done by looking at them from the outside of your house, or by looking at them from inside the house and counting how many there are.

Once you have counted all of them, you will want to make sure that none are too large for any type of repair that would still look natural after being fixed.

Woodpecker Holes In Your Stucco? Here's What You Can Do!

Woodpecker holes are common in stucco and other masonry surfaces. They’re most often caused by woodpeckers, but can also be caused by squirrels and other animals.

Woodpeckers typically find their way into your home through chimneys, vents and attic spaces. If you have woodpecker holes in your stucco, you can prevent them from getting worse by doing the following:

Clean out any remaining debris that may have fallen into the hole after it was drilled.

Check all of your vents to make sure they are not blocked with any debris or leaves. If they are clogged, remove them and clean them thoroughly.

If you have a chimney cap on your chimney, remove it and clean out any debris that is trapped underneath it. This will help prevent future damage to your home’s stucco system walls as well as provide ventilation for smoke coming out of your chimney during normal use (i.e., when someone is burning something inside).

Don't hesitate to contact us any time

Or

What Our Clients Says About Kirgil Construction

or

Stephanie Rioux Toronto

5/5

Very professional and knowledgeable team.

Alisa Rose Toronto
5/5
They did amazing work. Cleaned up after themselves and you can’t beat the price. I absolutely recommend them.
Mark Toronto
5/5

Great experience all around. The team did an amazing job and left the place as clean as they entered.

Make An Appointment
all over the Greater Toronto Area.

Feel free to take service from us because we believe in solution at anytime